13S 48V 15A BMS Li-ion Battery Protection Board (With connector) is an electronic system that manages a rechargeable battery by monitoring its state, calculating the data, reporting that data. It gives overcharge Protection, short circuit protection, and over-discharge protection to the battery. The term 13S 48V 15A BMS denotes 13 series 48V battery pack, and 15A continues discharging current. For a rechargeable battery pack, BMS is a must-needed device for safe operation.
Specification
- Charging Voltage: 54.6V
- Continuous Discharge Current: 15A
- Instantons Discharge Current: 100A
- Charging Current: 15A(Max)
- Working Temperature: -30~80℃
- Over-charge Detect: 28±0.05V
- Protect Delay: 100ms
- Number of cells in Series: 13S
- Compatible With: 48V lithium battery
- Release Voltage: 9±0.1V
- Detect Voltage: 150mV
- Detect Delay: 15mS
- Resistance: ≤15mΩ
B&R 10ML UV Curable PCB Solder Mask
2pcs SS Smooth Rod 8mm Diameter 200mm Length
5pc Set of 3mm Diameter Button Head 1 inch Bolt and Nut
R385 6V-12V Mini Aquarium DC Water Pump Diaphragm Based
5pcs P6KE12CA TVS Diode
775 DC Motor 6v-24v 9000 RPM High RPM High Power High Torque
20mm Spacer for Arduino Raspberry Ppi Robotics Pack of 5
28BYJ-48 5V Mini Stepper Motor
8×8 Dot LED Matrix Display LED Display Module
10gm 18 SWG 60-40 Grade Flux Coated Solder Wire
250gm 22 SWG Resin Coated Solder Wire
5gm 20 SWG Resin Coated Solder Wire
Arduino LilyPad Atmega328 Main Board
4 x 4 Inches Copper Clad Sheet Single Sided Laminate Circuit Board
24C64 64 Kbit Serial I2C Bus EEPROM Memory IC
Nema17 1.3A 2 Phase Hybrid Stepper Motor – Original
30gm 20 SWG Resin Coated Solder Wire
12W Micro Soldering Station – Controlled Soldering 












There are no reviews yet.